Heavy Duty Poly Storage Tanks - Bailiff Enterprises

Double Wall Plastic Storage Tanks - Choice of Plasic Resins

... We make an extended range of double wall chemical storage tanks.  Our tanks of 3,000 gallons and below can be made from High Density Polyethyelene (HDPE), from Polypropylene and from Polyvinylidene fluoride (PVDF).  The best known brand name for PVDF is Kynar.  The two most common reasons for choosing a particular resin other than polyethylene are the need for a higher continuous use temperature and compatibility with a particular chemical.  You can check the chemical compatibility of the chemical you are storing with our tank resins by clicking here.
Polyethylene is the most common choice because it is compatible with a wide variety of chemicals and it is the least expensive choice.  The primary limitation of Polyethylene is the upper continuous use temperature of 130 degrees F.  Click here to see our Double Wall Polyethylene (HDPE) tanks.
Polypropylene is the next most popular selection.  It is often chosen when a continuous use temperature of up to 200 degrees F. is needed.  Polyprolylene is also compatible with some chemicals that do not play well with Polyethylene.  Rotationally molded Polypropylene is brittle so care must be taken to keep it from impact.
PVDF (polyvinylidene fluoride) is a great resin since in certain applications it has a continuous use temperature of nearly 300 degrees F.  PVDF has good chemical compatibility.  The limiting factor on PVDF for Double Wall Storage Tanks is that PVDF is expensive.  Consequently, PVDF is selected only when the storage application requires the special properties that PVDF brings.
 
 
 
 
Our tanks are made in the USA. Send us an email.   Sales - 936-228-1520 We accept AMEX, Visa and MasterCardWe accept AMEX, Visa and MasterCard.We accept AMEX, Visa and MasterCard.