Rural homes, ranches, churches and businesses beyond the reach of a fire hydrant can keep their own fire water on site. A Bailiff fire water tank stores a dedicated reserve of water and is fitted with fire department connections (FDC), so an engine or brush truck can hook up and draft water the minute it arrives.

Typically a 4″ outlet with a full-port valve and a 4-1/2″ NH male adapter and cap, or Storz to match your department.
A smaller outlet, usually 2″, with a valve and a 1-1/2″ or 2-1/2″ NH adapter and cap.
Fill from a well or water line, with an optional float valve that keeps the tank full.
A reverse float level indicator on the outside of the tank shows the water level at a glance.
A screened vent sized for fast drafting, and a manway lid for inspection.
A “Fire Department Use Only” decal, plus wind and seismic tie-downs where required.
| Gallons | Diameter × height |
|---|---|
| 2,500 | 85″ × 117″ |
| 3,000 | 95″ × 116″ |
| 4,000 | 102″ × 127″ |
| 5,000 | 95″ × 174″ or 142″ × 86″ |
| 6,000 | 102″ × 182″ |
| 8,000 | 120″ × 182″ |
| 10,000 | 142″ × 150″ |
| 12,000 | 141″ × 193″ |
Molded by Bailiff in Willis, Texas through 10,000 gallons. Tanks can be linked together for more volume.
There is no single national number for fire tank connections. NFPA 1142 sets how much water a rural property needs, NFPA 22 covers fire protection tanks, and the International Fire Code covers water supply and fire department access. Your local fire marshal applies these and writes the final rules. Here is what most require.
| Truck | Typical intake | What we usually install |
|---|---|---|
| Engine / pumper | 4-1/2″ or 6″ NH hard suction, or 4″, 5″ or 6″ Storz | 4″ (or 6″) outlet, full-port valve, 4-1/2″ NH male adapter and cap (or Storz) |
| Brush / grass truck | 1-1/2″ or 2″ suction intake | 2″ outlet, valve, 1-1/2″ or 2-1/2″ NH male adapter and cap |
| Hand lines / tender fill | 2-1/2″ NH, the most common fire hose thread | 2-1/2″ NH outlet, or a wye off the pumper connection |
NH = National Hose thread (also called NST). Some departments use Storz quick-connect couplings or local threads; we match whatever your department uses.
NFPA 22 lists steel, concrete, wood, fabric and fiberglass tanks; polyethylene tanks are approved locally by the fire marshal. Distances are typical values from published county fire district standards. Local requirements govern.